TTL-RS232 Debug Cable for Raspberry

€23.91 (Ex tax: €19.60)

In stock (backorders allowed)

SKU: TTLUSBRPI. Category: .

Product Description

TTL-232R-RPi is a USB to TTL level serial UART converter cables incorporating FTDI’s FT232RQ USB to Serial UART interface IC device which handles all the USB signalling and protocols. The TTL-232R-RPi is designed for use with the Raspberry Pi (RPi), an ultra-low cost, Linux based miniaturised computer. The debug cable sits on the Rx/Tx of the RPi ARM processor UART – which provides much more detail of what’s happening within the RPi operating system. Connecting the debug cable to a PC and communicating with the RPi via a terminal emulator on a PC gives the user access to more detailed information from the Linux kernel during RPi start-up, which appears on the Rx/TX lines of the UART, as well as being able to login and access the kernel itself from the PC.

  • On board FT232RQ provides single chip USB to asynchronous serial data transfer interface
  • Entire USB protocol handled by the electronics in the cable USB
  • Connect directly to a microcontroller UART or I/O pins
  • Fully assisted or X-On / X-Off software handshaking
  • Data transfer rates from 300baud to 3Mbaud at TTL levels
  • Internal EEPROM with user writeable area
  • Low USB bandwidth consumption
  • Support for FT232R FTDIChip-ID feature for improved security
  • 3x flying leads outputs provide TXD, RXD and GND signals
  • UHCI / OHCI / EHCI host controller compatible

Data Sheet


There are no reviews yet.

Be the first to review “TTL-RS232 Debug Cable for Raspberry”